. . . X-tee . . .

It all started with this very easy stitch pattern when I made a few little swatches to try out new patterns. I must admit that I rarely use stitch patterns from a book, I usually make them up myself…

Find out more and see more examples of X-tee here

With a yarn that has some sheen it gives the right but subtle contrast to show off the slipped stitch pattern. I used a cotton/bambou blend.

X-tee is a short sleeved tee or a pullover with drop shoulders and 3/4 sleeves. Both options are included.

I like to wear it over a shirt like this.

It features a subtle and very easy stitch pattern, a V-neck that follows the diagonal lines, and split hems. It is best to choose a yarn that has some sheen to enhance the effect of the diagonal lines.

First the back is worked top down and back and forth to the armpits. Then stitches are picked up to work the fronts to the armpits. From here the body is worked in the round in one piece. Stitches are picked up to work the 1/1 ribbing or to work longer sleeves using the same slipped stitch pattern.
Finally an applied I-cord can be added to finish the neckline – if desired.

• 

• 

• 

• 

Sizes
XS / S / M / L / XL / XXL / XXXL
finished measurements chest: 31¾ / 35¼ / 40¼ / 43¼ / 46½ / 50½ / 53½ “ (80.5 / 89.5 / 102 / 110 / 118 / 128.5 / 136 cm)

Intended to be worn with 7 to 13 cm / 3 to 5” of positive ease.

What you’ll need
fingering weight / 4ply
short sleeved tee
± 730, 820, 950, 1000, 1100, 1200, 1300 m (800, 900, 990, 1100, 1200, 1300, 1400 yards)
with elbow sleeves
add 200 to 350 m / 220 to 380 yards

3 mm (US 2½) circular needle and straight needles (optional) or size to obtain gauge
2.5 mm (US 1½) circular needle
3 mm (US 2½) double pointed needle for the I-cord finishing at the neck (optional)
6 markers
scrap yarn or stitch holders

Gauge
10 x 10 cm (4” x 4”) = 28 sts and 56 rows in slip stitch pattern with the 3 mm / US 2½ needle

Find out more and see more examples of X-tee here

. . . Florally – the pullover . . .

More info and examples here

When I was drawing the chart for this hat, I knew I would do more with it.

The original chart was much larger than what the part I used to make the hat…

I just didn’t know yet what I would make of the whole chart…

Until I dug up two beautful dark colored skeins of Dye For Yarn… and a blueish-greyish-natural skein from Snail Yarns.

They work so well together, the dark bordeaux looks almost velvet against the naturals.

Florally is a loose pullover with a V-neck, drop shoulders, 3/4 sleeves and a unique colorwork pattern at the bottom. Starting with a provisional cast on, the back is first worked bottom up and back and forth.

Stitches are bound off for the back neck, a subtle patterned saddle shoulder is worked followed by the fronts that are knitted top down to the armpits.

The saddle shoulder is quite subtle with a leaf motif in purl stitches and a third color – if desired.

Here is a little trick when joining both fronts of the V-neck worked top down. When you have knit both fronts to the right length and you join them, it often looks sloppy with a few elongated stitches at that join. To reinforce the join there is a simple trick: twist the last stitch of the right front and the first stitch of the left front you are joining to…

So, knit to the last stitch (or two stitches) of right front – in the photo above you can see that I twisted 4 stitches (2 at each front) -, place those stitch(es) on a cable needle and hold in front, then knit 1 or 2 stitches at the beginning of the left front, knit the stitches from the cable needle and continue the row (of course you don’t need a cable needle to twist those stitches, you can do it without, I only used it to explain the principle).

Another – even easier – method is to k2tog those 2 stitches, but you will end up having 1 stitch less.

From this point the body is worked further down in the round.
Stitches are picked up for the sleeves which are worked top down and in the round with a smaller motif at the cuffs.

Finally an applied I-cord finishes the neckline.

Sizes
XS / S / M / L / XL / XXL / XXXL
finished measurements chest: 31½, 34½, 39, 43, 47, 50½, 54“ (80, 88, 100, 109, 119, 129, 138 cm)
Intended to be worn with 7 to 13 cm / 3 to 5” of positive ease

What you’ll need
fingering weight / 4ply
sleeveless tee
MC1: ± 730, 820, 950, 1000, 1100, 1200, 1300 m (800, 900, 990, 1100, 1200, 1300, 1400 yards)
CC: ± 180, 200, 220, 250, 280, 300, 340 m (200, 220, 240, 280, 310, 330, 370 yards)
MC2 (optional) a small quantity ± 50 m (55 yards)
with elbow sleeves
add 200 to 350 m / 220 to 380 yards of MC1
and 60 m / 66 yards of CC

3 mm (US 2½) circular needle and straight needles (optional) or size to obtain gauge
3.25 mm (US 3) circular needle
2.75 mm (US 2) circular needle
3 mm (US 2½) double pointed needle
cable needle
4 markers
scrap yarn or stitch holders

Gauge
10 x 10 cm (4” x 4”) = 27.5 sts and 40 rows stockinette with the 3 mm / US 2½ needle
or 27.5 sts and 38 rows in stranded colorwork with the 3.25 mm / US 3 needle.

More info and examples here

. . . fer forgé . . .

Let me present my new pattern to you… It has just been released.

Fer forgé, a cabled pattern inspired by a beautiful ironwork table.

This was my first tryout, but it looked a little too much to me… too many cables and bobbles … So I eliminated a few small cables and bobbles. Below is the new swatch.

I usually don’t know where the inspiration comes from, it just pops up, but this time I do 😀

The slightly oversized, cropped pullover is worked top down and seamlessly in the round.

It starts with the neckband, then a few short rows are worked to shape the back neck, the circular yoke is built up with cables and bobbles.

Similar cable patterns are added to the bottom sides …

and the sleeves…

Sizes: XS / S / M / L / XL / XXL / XXXL
finished measurements chest: 35½ / 39¼ / 43¼ / 46 / 50 / 52¾ / 57 “ (90 / 100 / 110 / 117 / 128 / 134 / 145 cm)
Intended to be worn with positive ease (5 to 20 cm / 2” to 8“). Model is wearing M with 16 cm / 6¼” positive ease.

• 

• 

What you’ll need
worsted weight
cropped version
± 900/1000/1050/1150/1250/1350/1400 m (1000/1100/1150/1250/1370/1470/1540 yards)
4.5 mm (US 7) circular needle or size to obtain gauge
4 mm (US 6) circular needle for the neckband
3.5 mm (US 4) circular needle for the cuffs
8 markers

Gauge:
20.5 sts and 28 rows in stockinette stitch with the largest needle

Find out more here