More info and examples here
When I was drawing the chart for this hat, I knew I would do more with it.
The original chart was much larger than what the part I used to make the hat…
I just didn’t know yet what I would make of the whole chart…
Until I dug up two beautful dark colored skeins of Dye For Yarn… and a blueish-greyish-natural skein from Snail Yarns.
They work so well together, the dark bordeaux looks almost velvet against the naturals.
Florally is a loose pullover with a V-neck, drop shoulders, 3/4 sleeves and a unique colorwork pattern at the bottom. Starting with a provisional cast on, the back is first worked bottom up and back and forth.
Stitches are bound off for the back neck, a subtle patterned saddle shoulder is worked followed by the fronts that are knitted top down to the armpits.
Here is a little trick when joining both fronts of the V-neck worked top down. When you have knit both fronts to the right length and you join them, it often looks sloppy with a few elongated stitches at that join. To reinforce the join there is a simple trick: twist the last stitch of the right front and the first stitch of the left front you are joining to…
So, knit to the last stitch (or two stitches) of right front – in the photo above you can see that I twisted 4 stitches (2 at each front) -, place those stitch(es) on a cable needle and hold in front, then knit 1 or 2 stitches at the beginning of the left front, knit the stitches from the cable needle and continue the row (of course you don’t need a cable needle to twist those stitches, you can do it without, I only used it to explain the principle).
Another – even easier – method is to k2tog those 2 stitches, but you will end up having 1 stitch less.
From this point the body is worked further down in the round.
Stitches are picked up for the sleeves which are worked top down and in the round with a smaller motif at the cuffs.
Finally an applied I-cord finishes the neckline.
XS / S / M / L / XL / XXL / XXXL
finished measurements chest: 31½, 34½, 39, 43, 47, 50½, 54“ (80, 88, 100, 109, 119, 129, 138 cm)
Intended to be worn with 7 to 13 cm / 3 to 5” of positive ease
What you’ll need
fingering weight / 4ply
MC1: ± 730, 820, 950, 1000, 1100, 1200, 1300 m (800, 900, 990, 1100, 1200, 1300, 1400 yards)
CC: ± 180, 200, 220, 250, 280, 300, 340 m (200, 220, 240, 280, 310, 330, 370 yards)
MC2 (optional) a small quantity ± 50 m (55 yards)
with elbow sleeves
add 200 to 350 m / 220 to 380 yards of MC1
and 60 m / 66 yards of CC
3 mm (US 2½) circular needle and straight needles (optional) or size to obtain gauge
3.25 mm (US 3) circular needle
2.75 mm (US 2) circular needle
3 mm (US 2½) double pointed needle
scrap yarn or stitch holders
10 x 10 cm (4” x 4”) = 27.5 sts and 40 rows stockinette with the 3 mm / US 2½ needle
or 27.5 sts and 38 rows in stranded colorwork with the 3.25 mm / US 3 needle.
More info and examples here